Afx HZS1016218QENSNFSS Manuel d'utilisateur télécharger pdf

Hudson – HZS Series Fluorescent Wall Sconce

Model 218

Page 1 of 1 8060305 rev.3

Read all safety precautions and installation instructions carefully

before installing or servicing this fixture. Failure to comply with

these instructions could result in potentially fatal electric shock

and/or property damage.

It is recommended that all wiring shall be performed by a qualified

electrician. This fixture must be wired in accordance with all national

and local electrical codes.

Do not handle any energized fixture or attempt to energize any

fixture with wet hands or while standing on a wet or damp surface or

in water.

This fixture is designed for use in a 120VAC, 60Hz fused circuit.

Do not use on a dimming circuit. Make sure that the power source

conforms to the requirements of the fixture (see labels on fixture

housing).

To reduce the risk of electrical shock, and to assure proper operation,

this fixture must be adequately grounded. To accomplish proper

grounding, there must be a separate ground wire (green) or bare metal

contact (metal conduit) between this fixture and the ground

connection of your main power supply panel. The green ground

screw location is clearly marked on the fixture housing. This fixture

is intended to be used for general indoor lighting in dry or damp

locations only.

Assembly Instructions

1. Preparing for installation-

A. Disconnect electrical power

before installing or servicing

any part of this fixture.

B. Remove shade assemblies (2),

and fixture assembly (6) from

cartons. Separate contents of

hardware bag.

2. Mounting-

A. Attach mounting plate (7) to

junction box (not provided)

with two of the long screws

provided (9)

B. Pull supply wires through the

mounting plate.

C. Twist green (or green and

yellow) wire from fixture with

supply ground and attach to the

green ground screw on the

mounting plate. Tighten ground

screw.

3. Wiring- all wiring must take

place inside junction box.

Caution: Make sure power is off at

fuse or circuit breaker box. Check

power wires for damage or scrapes. If

power supply wires are within three

inches of ballast use wire suitable for at

least 90C (194F). Note: Most dwellings

built before 1985 have supply wire rated to 60C. Consult

a qualified electrician before installing.

A. Using wire connectors, connect white supply

wire to white lamp lead.

Connect black hot supply

wire to black lamp lead.

Do not mix wires. Tuck

all connections neatly into

junction box.

B. Line the holes in the

fixture canopy (6) with the

holes on the mounting

plate (7). Insert supplied

screws(8) into threaded

holes in the mounting pan

and tighten securely.

4. Lamp -Install appropriate

lamp (4). Insert lamp pins into

lamp holder (5) and press

downwards until lamp snaps in

place.

5. Shade -To install shade

assembly, align the two holes

in the top of the shade (2) with

the two threaded studs on top

of the harp (3) and secure with

threaded ball nuts (1).

6. Restore power at fuse or circuit

breaker box.

Limited Factory Warranty

AFX Lighting, Inc. hereby warranty that this fixture is free from defects in materials and workmanship when installed and used under normal operating conditions for a period of 2

years from date of purchase. This warranty covers all component parts and extends only to replacement of defective fixture or components; it does not cover failure due to

improper installation, misuse, mishandling or damage incurred in transit.

Safety Precautions

Résumé du contenu

Page 1 - Safety Precautions

Hudson – HZS Series Fluorescent Wall Sconce Model 218 Page 1 of 1 8060305 rev.3 Read all safety precautions and installation instructions car

Modèles reliés HZS1016218QENSNFT

Commentaires sur ces manuels

Pas de commentaire

Afx HZS1016218QENSNFSS Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Afx HZS1016218QENSNFSS. AFX HZS1016218QENSNFSS User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés HZS1016218QENSNFT

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Afx HZS1016218QENSNFSS