Afx WCM232R8 Manuel d'utilisateur télécharger pdf (Page 2)

Decorative Wood Surface Mounted Fluorescent Fixture

CCM/DMC/KCM/RI/UCM/WCM Series - 232/2U3/432 Models

8060310 rev.1

NOTE: It is possible to remove the lamps and diffuser without removing the frame from the fixture.

A. Slide the diffuser to one corner, which will allow the opposite corner to clear the frame.

B. Slowly pull the opposite corner of the diffuser past the frame and guide the rest of the diffuser out.

To remove the lamps, rotate them out of their sockets and angle the lamp from corner to corner and drop the lamp through the frame

opening. Follow the opposite procedure to replace the lamps.

To replace the diffuser, insert one corner all the way into the corner of the wood frame. Bow the lens slightly and insert the adjacent corner

inside of the frame. Bow the lens on the longest edge sliding one corner inside of the frame and then the last corner. Allow the diffuser to

drop down and center the lens inside of the wood frame.

Limited Factory Warranty

American Fluorescent Corporation hereby warranty that this fixture is free from defects in materials and workmanship when installed and used under normal operating

conditions for a period of 2 years from date of purchase. This warranty covers all component parts and extends only to replacement of defective fixture or components;

it does not cover failure due to improper installation, misuse, mishandling or damage incurred in transit.

Page 2 of 2

1 2

Commentaires sur ces manuels

Pas de commentaire

Afx WCM232R8 Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Afx WCM232R8